Views: 254 Author: Site Editor Publish Time: 2022-11-01 Origin: Site
The irradiation range of Solar flood light can be adjusted as desired. It is a widely used light source in daily life. The lifespan of flood light is relatively long, it is more energy-saving and environmentally friendly to use, and does not harm the environment. Also the color reproduction is very good and the installation very comfortable.
What are the precautions for installing and using Solar flood light?
What are the installation steps for Solar flood light?
What is the mounting height of the Solar flood light?
1. When installing, the photovoltaic panels should be exposed to sunlight as much as possible. Solar flood lights, as the name suggests, use solar energy, and it must be ensured that the sunlight can directly hit the photovoltaic panels in order to absorb energy and power the lights.
2. Connect the waterproof cable between the photovoltaic panel and the lamp head. If the photovoltaic panel and the lamp are not connected well, the solar energy received by the photovoltaic panel cannot be transmitted to the battery in the lamp for storage through the wire, resulting in the Solar flood light not lighting without electricity.
3. Be careful to fix the lamp head and solar panel so as not to fall off when the wind blows.
4. If conditions permit, clean up the fallen leaves, dust and stains on the surface of the photovoltaic panel in about three months.
What are the installation steps for Solar flood light?
1. Check whether the Solar flood light works normally before installation.
2. After confirming that the light is on, install the lamp head and solar panel in the selected location. The installation angle can be adjusted according to the actual situation. If it is installed on a tree or a utility pole, you need to use a hoop to tie them to it. Note that there should be no obstructions above the solar panel, otherwise the lighting time will be affected. After installation, pay attention to adjusting the direction of the solar panel.
3. Plug the waterproof cable between the lamp head and the solar panel.
4. Finally check whether the installation is firm.
The standard installation height of Solar flood light is 3 to 5 meters. According to the lighting environment, because the environment will change the reflection efficiency of the lamps. Generally, the height of the lamps should be more than 5 meters. If the conditions are necessary, the installation is less than 3 meters, and protective measures must be taken to prevent vehicles from touching. Solar flood light is a point light source that shines evenly in all directions. It illuminates an object evenly from a certain point in all directions. The exposure range can be adjusted as desired. Floodlights are the most commonly used light sources in render production. Standard headlights are used to illuminate the entire scene. Multiple Solar flood lights can be applied in one scene.
Zhongshan Haoxintai Lighting Technology Co., Ltd. has been around for over ten years. As the most competitive manufacturer in China, we will devote ourselves to making the most competitive products for our customers.
